An audio/video receiver (AVR) is a consumer electronics component used in a home theater. Its purpose is to receive audio and video signals from a number of sources, and to process them to drive loudspeakers and displays such as a television, monitor or video projector. Inputs may come from a satellite receiver, radio, DVD players, Blu-ray Disc players, VCRs or video game consoles. The AVR source selection and settings such as volume, are typically set by a remote controller.
Video AV receiver
Usage
The term receiver basically refers to an amplifier that has a built-in radio tuner. With A/V receivers, the basic functionality is to receive an audio signal, amplify the audio signal, and allow pass-through of the corresponding video signal to a display device such as a projector or a television.
As home entertainment options expanded, so did the role of the receiver. The ability to handle a variety of digital audio signals was added. More amplifiers were added for surround-sound playback. Video switching was added to simplify changing from one device to another. Within the last few years, video processing has been added to many receivers.
The term audio/video receiver (AVR) or Home Theater Receiver is used to distinguish the multi-channel audio/video receiver (home theater receiver) from the simpler stereo receiver, though the primary function of both is amplification.
AV receivers may also be known as digital audio-video receivers or digital media renderers.
The AV receiver is classified as an audio frequency electronic amplifier. But with the rapid addition of several features, AV receivers now generally have significant additional functionality.
Maps AV receiver
Features
Channels
Stereo receivers have two channels of amplification, while AV receivers may have more than two. The standard for AV receivers is five channels of amplification. These are usually referred to as 5.1 receivers. This provides for a left, right, center, left surround and right surround speaker to be powered by the receiver. 7.1 receivers are becoming more common and provide for two additional surround channels, left rear surround and right rear surround. The ".1" refers to the LFE (low-frequency effects/bass) channel, the signal of which is usually sent to an amplified subwoofer unit. 5.1 and 7.1 receivers don't usually provide amplification for this channel. Instead, they provide a line level output.
Amplifier power
Audio amplifier power, normally specified in Watts, is not always as significant as it may seem from the specification. Due to the logarithmic nature of human hearing, audio power or sound pressure level (SPL), must be increased by ten times to sound twice as loud. This is why SPL is measured on a logarithmic scale in decibels (dBs). An increase of 10dBs results in a perceived doubling of loudness. Another complication with human hearing is that as the SPL decreases the perceived volume of the low and high frequencies decreases faster than the central frequencies around 2 kHz.
There are different standards for rating amplifier power depending on country, manufacturer, and model. Other factors also come into play: distortion, headroom, speaker efficiency. Thus, it is possible for an amplifier with a specified lower power to sound louder than an amplifier with a specified higher power.
Because of these factors, it is not easy to compare the perceived loudness of amplifiers solely from their specified power in Watts.
Decoders
AV receivers usually provide one or more decoders for sources with more than two channels of audio information. This is most common with movie soundtracks, which use one of a variety of different types of encoding formats.
The first common soundtrack format was Dolby Pro Logic, a surround sound processing technology. This format contains a center channel and a surround channel mixed into the left and right channels using a process called matrixing, providing a total of four channels. Receivers with Dolby Pro Logic decoders can separate out the center and surround channels from the left and right channels.
With the introduction of the DVD, the Dolby Digital format became a standard. Dolby Digital ready receivers included inputs and amplifiers for the additional channels. Most current AV receivers provide a Dolby Digital decoder and at least one digital S/PDIF input which can be connected to a source which provides a Dolby Digital output.
A somewhat less common surround sound decoder called DTS is standard on current AV receivers.
When Dolby Labs and DTS introduced technologies to add a rear center surround channel, these technologies found their way into AV Receivers. Receivers with six amplifiers (known as 6.1 receivers) will typically have both Dolby and DTS's technologies. These are Dolby Digital EX and DTS ES.
Dolby introduced Dolby Pro Logic II to allow stereo sources to play back as if they were encoded in surround sound. DTS introduced a similar technology, Neo:6. These decoders have become common on most current receivers.
As the number of playback channels were increased on receivers, other decoders have been added to some receivers. For example, Dolby Labs created Dolby Pro Logic IIx to take advantage of receivers with more than five channels of playback.
With the introduction of high definition players (e.g. Blu-ray Disc and HD DVD), yet more decoders have been added to some receivers. Lossless Dolby TrueHD and DTS-HD Master Audio decoders are available on many receivers.
While Dolby Digital has been the standard for television and video games, Dolby Digital Plus has been adopted for online streaming services such as Netflix, and adds a much higher bit rate and can support more channels.
Dolby Atmos and DTS:X adds in ceiling height channels.
DSP effects
Most receivers offer specialized Digital Signal Processors (DSP) made for handling various presets and audio effects. Some may offer simple equalizers and balance adjustments to complex DSP audio field simulations such as "Hall", "Arena", "Opera", etc. that simulate or attempt to replicate as if the audio were being played in the places through use of surround sound and echo effects.
AV inputs/outputs
There are a variety of possible connections on an AV receiver. Standard connectors include:
- Analog audio (RCA connector, or occasionally XLR connector)
- Digital audio (S/PDIF; TOSLINK or RCA terminated coaxial cable)
- Composite video (RCA connector)
- S-Video
- SCART video (primarily used in Europe and very uncommon in many other parts of the world)
- Component video
- HDMI
- USB (usually involves special computer circuitry to read video formats from a file system)
Analog audio connections usually use RCA plugs in stereo pairs. Inputs and outputs are both common. Outputs are provided mainly for cassette tape decks.
Analog audio connections using XLR(Balanced) connectors are uncommon, and usually found on more expensive receivers.
Some receivers are also equipped with phono inputs, for connecting a turntable with a magnetic cartridge, although many receivers are lacking this input. In the last years, since vinyl players are popular again, there are some manufacturers of A/V receivers which are offering a phono input on some models. Some receivers also have a selectot for either MM/MC cartridge type. However, audiophiles are not buying home cinema receivers to listen to their collection of vinyls, they will rather buy a stereo amplifier. This feature is mainly offerred to allow people owning a turntable to connect it and listen to their collection. Most receiver will play only in stereo, only front or main speakers, but some receiver may play on all speakers deppending on the manufacturer and model.
Digital connections allow for the transmission of PCM, Dolby Digital or DTS audio. Common devices include CD players, DVD players, or satellite receivers.
Composite video connections use a single RCA plug on each end. Composite video is standard on all AV receivers allowing for the switching of video devices such as VHS players, cable boxes, and game consoles. DVD players may be connected via composite video connectors although a higher bandwidth connection is recommended.
S-Video connections offer better quality than composite video. It uses a DIN jack.
SCART connections generally offer the best quality video at standard-definition, due to the use of pure RGB signalling (although composite and S-Video may alternatively be offered over a SCART connector). SCART provides video and audio in one connection.
Component video has become the best connection for analog video as higher definitions such as 720p have become common. The YPbPr signalling provides a good compromise between resolution and colour definition.
HDMI is becoming common on AV receivers. It provides for the transmission of both audio and video. HDMI is relatively new technology and there are reported issues with devices not properly working with each other (referred to as hand-shake issues between devices), especially cable/satellite boxes connected to a display through an AV receiver. Different levels of support are provided by receivers with HDMI connections. Some will only switch video and not provide for audio processing. Some will not handle multi-channel LPCM. Multi-channel LPCM is a common way for Blu-ray Disc and HD DVD players to transmit the best possible audio.
Video conversion and upscaling
Some AV Receivers can convert from one video format to another. This is commonly called upconversion or transcoding. A smaller number of receivers provide for de-interlacing of video signals. For example, a receiver with upconversion, deinterlacing and upscaling can take an interlaced composite signal at 480i (480 lines per frame sent as a field of 240 even numbered lines 0,2,4,8...478 followed by a field of 240 odd numbered lines 1,3,5,...479) and convert it to component video while also deinterlacing and upscaling it to a higher resolution such as 720p (720 lines per frame with all lines in normal sequence 0,1,2...719).
Radio on AVRs
AV receivers though primarily used for amplification may or may not have an inbuilt AM/FM radio tuner among other features such as LAN connectivity for various Internet applications and some with multi-room audio solutions.
Even though some AVRs may have an AM/FM tuner it is not a primary or mandatory function as an AVR still remains an amplifier.
Some models have HD Radio tuners.
Some models have Internet radio and PC streaming access capabilities with an Ethernet port.
Brands
Some notable brands of AV receivers include:
See also
- Amplifier
- THX
- Digital media receiver
- Home cinema
- Home theater PC (HTPC)
References
External links
- Block Diagram of a typical Receiver
- What To Look For In a Receiver
- HDMI switch guide for audio video switching
- Audio/Video Receiver FAQ
Source of article : Wikipedia
0 Comments